According to my contact in the Tech Services department at Curt Manufacturing, their # 31049 will fit a 1998 Ford F150 2WD model as long as it has factory tow hooks mounted to the underside of the frame members. Draw-Tite has the # 65025 listed as a 'no fit' for a 2WD model.
You can see the installation details by clicking the provided link. view full answer...
The Curt T-Connector #C55242 is designed to plug in line of the connector that is in the drivers side frame rail near the rear bumper. You will undo the connection and plug the 2 connectors in line of that single plug. I have no idea what that 2nd round plug that you have goes into or is for as I have been unable to identify it.
I have included a link below to the installation instructions PDF that shows a color picture of where the connection is and how the Curt connector plugs in line. view full answer...
The replacement jack pipe mounts we offer like Bulldog # BD500240 and # BD500339 are only offered in weld-on versions. We do have many bolt-on jacks that you can see on the linked page. These include items such as the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels # FXPD15L. view full answer...
There is a plug and play style connector that fits the Tekonsha P2, # 90885, and your 1997 Ford F-150 provided that the 7-Way trailer connector you have is from the factory. You would need Tekonsha Wire Replacement, # 3035-P. I have included a link to the installation details and a video showing a typical installation. The factory connection point on the truck will be located under the dash near the center console on most vehicles. view full answer...
You can use Tekonsha Pigtail Wiring Harness # 7894 for your secondary brake controller installation in your motor home. The harness has the 4-wire pigtail leads you'll need to hard-wire into your motor home's wiring and it includes the necessary butt connectors. It is 34-inches overall in length. An install video is linked at right. If you need only a short harness without connectors you can use 12-inch harness # 20127.
If you need an extra mounting pocket for the Prodigy you can use # 7686. view full answer...
For your 1997 Ford F-250 Super Duty with 4.6L engine we offer the Edge Gas Evolution CTS2 tuner # EP85350. This tuner can provide gains of up to 15 more horsepower and torque increases up to 20-lb-feet.
Please refer to the linked article for more on performance chip tuners and monitors. Please note these are not legal for use in California. view full answer...
I looked up the part number you mentioned and it is basically just a 7-way to 4-way adapter for Ford 7-ways. For that all you would need is the part # PK12716 which is also made by Pollak. view full answer...
It sounds like you are looking for a hitch adapter to allow your gooseneck hitch to tow a 5th wheel trailer. On the linked page you can see the options we offer and the included article will give you good background on all choices.
These options include adapters that attach to a gooseneck ball and the superior method of towing a fifth wheel with a gooseneck hitch, the Reese Goosebox replacement pin box. These three products are shown on the linked page.
A Goosebox is a replacement pin... view full answer...
Go To Results